INTERACTIVE DEMO MODE
All data is simulated. Adjust values in the Demo Controls panel below.
🎮 Demo Controls
Adjust these sliders to simulate sensor readings and see how PumpLogic responds.
45.0°F
12.80 V
📊 Status
🌡 Temp °F
45.0 °F
🔋 Voltage
12.80 V
⚙ Relay
OFF
🛡 Lockout
Normal
📅 In Schedule
Yes
📈 Today Temp Range
—
📈 Today Volt Range
—
⏱ Runtime Today
0h 0m
⏱ Runtime Lifetime
0h 0m
⚡ Charge Recovery
Duration of Charge: 4 hour(s)
Charge voltage target: 14.6 V
Waiting for voltage to reach 14.6 V...
🎛 Manual Control
Force ON: Turns the relay on for the ON Duration time, then resumes automatic cycling. Force OFF: Turns the relay off immediately and resumes automatic cycling. Charge Recovery: Initiates charge recovery using saved settings. Pump is disabled until recovery completes. Reboot: Restarts the device.
📶 Network
SSID
PumpLogic
IP Address
192.168.4.1
🌐 mDNS
pumplogic.local
⌛ Uptime
0m
🕐 Current Time
—
🔄 Last RTC Sync
—
🔋 Battery Charge/Discharge
Battery%--
↔ Swipe or scroll to see full 24 hours
Readings are every 15 mins for a max of 24 hours. Resets on reboot.
